Inspection and acceptance after erection of scaffold

    The structure of the frame conforms to the requirements of the construction scheme, and the change of the size of the individual parts should be within the permitted range of adjustment, and the safety connection of the nodes is reliable. The tightening fasteners should be controlled to 40N.m~60N.m torque, all welding parts welding quality should be reliable, the embedded embedded parts should meet the design requirements, with sufficient strength, joint wire connections should be reliable；

　 The verticality of the vertical pole should be less than + 300, and the maximum vertical deviation 75rnrn should be controlled simultaneously. The horizontal deviation of the longitudinal horizontal rod of the scaffold should be less than 1/250. The level of bias and full frame length value is not greater than 50mm; operation layer planking and safety protection should comply with the relevant requirements; acceptance of mobile scaffolding and daily inspection should be carried out regularly, after passing the examination, permission to put into use or continue to use。