How to maintain aluminum alloy elevator

With the development of social science and technology, the use of aluminum alloy elevator is more and more widely, no matter in which industry, will be involved in the application of it, has become an indispensable tool in people's daily life. So how do we normally maintain it?

It is divided into two modes: monthly maintenance and year-end maintenance：

1、Monthly maintenance: Elevator maintenance personnel to enter the elevator interior work, must hang a lift to prevent the elevator suddenly dropped causing casualties, a, check the wheel, shaft and bearing; cylinder pin shaft and bearings; arm frame hinge shaft and bearing lubrication and wear; B, filling all the parts lubricating oil. Extend the service life of bearing; C, check hydraulic oil and oil level. When the lifting platform rises to the highest level, the hydraulic oil surface should be 40-50 millimeters higher than the bottom of the tank. Hydraulic oil color dark, oily or sticky, gravel and other foreign bodies in the oil, the timely replacement of hydraulic oil. Application of 32# hydraulic oil in hydraulic system of lifting table。

2、Annual end of year maintenance: A, check hydraulic and pipeline connections. The pipeline damaged should be replaced immediately; connecting parts loose fastening pipe joint; B, remove and remove the drop valve with compressed air valve will be blown from the newly installed after; C, the hydraulic oil tank in all do open the tank, remove oil filter, washed back into the fuel tank, according to the in situ installation. New oil is filled in the tank。

The above is the aluminum alloy elevator maintenance measures, people usually pay attention to use！