Code for design of aluminium alloy scaffold

Aluminum Alloy scaffold product series design completely by BS1139, EN12810, EN1004, international safety and quality standards, easy handling and build, in addition to a single set of independent use, can also form a large structure for an elevator, stairs, etc. - site Aluminum Alloy is also more rugged lightweight materials。

Design advantages：

1、All the frames are designed with "interlocked elastic clamp", which is easy to assemble and disassemble, and can be used freely. The "T" type welding structure prolongs the service life of the scaffold。

2、The tower on both sides of every 50 cm can be laid the platform board, each platform plate weight 272 kg, height at the same time allow people。

3、Skid platform board special wet weather, with aluminum platform edge for protection, enhance the safety of operation。

4、Open platform will be automatically closed when the lock plate is closed; when handling the bolt firmly on the valve to prevent accidents。

5、Platform protection skirting is widened to 200 mm, to prevent the tool from falling off。

6、The aluminum alloy connecting buckle of the outer support rod can be installed quickly, and the stability of the tower is enhanced。

7、All the support bars are made of high quality cast aluminium, and the horizontal and oblique support rods are distinguished by color: Red oblique bar, green cross bar。

8、The adjustable range of the castor adjusting rod is increased to 290 millimeters, and the installation condition of the scaffold is enlarged, which is suitable for the uneven ground work. The movable castor is oil proof and anti-corrosion, and won't make the marble floor of the lobby。

9、The new pipe surface anti slip design, enhanced operation safety。

10、In the selection of ladder (with a handrail)